The Palmer Method of Business Writing: Lesson 36

Written by palmer | Published 2022/10/12
Tech Story Tags: self-teaching | educational | hackernoon-books | project-gutenberg | books | a.-n.-palmer | handwriting | the-palmer-method-of-business

TLDRDrill 38via the TL;DR App

The Palmer Method of Business Writing, by A. N. Palmer is part of the HackerNoon Books series. You can jump to any chapter in this book here. Lesson 36

LESSON 36

Drill 38
Small a should be reviewed frequently as a movement drill.
Drill 39
The first part of small a serves as the foundation of small c. In making connective lines, an over-motion must be used. If an under-motion is used from the ending of one c to the dot at the top of the next, there will be a loop, and the letter will be too large. After making a few lines, compare the height of c with o, a, m, and n. You will, of course, frequently compare with the copy. The count is 1–2, 3–4, 5–6, 7–8, 9–10; or dot over, dot over, dot over, dot over, dot over, for each group of five. The speed should be sixteen groups of five, or eighty letters a minute.
About HackerNoon Book Series: We bring you the most important technical, scientific, and insightful public domain books. This book is part of the public domain.
Palmer, A. N. 2021. The Palmer Method of Business Writing. Urbana, Illinois: Project Gutenberg. Retrieved September 2022 from https://www.gutenberg.org/files/66476/66476-h/66476-h.htm
This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org, located at https://www.gutenberg.org/policy/license.html.

Written by palmer | The Palmer Method of Business Writing
Published by HackerNoon on 2022/10/12